Close

888-4TE-WIRE / 888.483.9473 sales@tewire.comAccuclave Tracking

Polyimide Tape

Polyimide Tape

Polyimide Tape is a high performance insulating tape that gets fused to conductor and jackets. This product provides excellent moisture and abrasion resistance, high dielectric strength and it retains much of its physical integrity after gamma radiation exposure. FEP is used as the adhesive agent during the fusing process. Polyimide Tape product operates up to 500 Degrees F (260 Degrees C).

Applications
Available Options
Features
Specifications
Ordering Code
    • Aerospace Industry
    • Power Generation
    • Laboratories
    • Petrochemical Plants
    • Cryogenic
    • Applications
    • Pharmaceutical
    • Autoclaves
    • Metal Overbraid
    • Galvanized Half-Oval Armor
    • Twisted/Shielded Pair
    • Small Diameter HF/D Overall Jacket (One Insulated One Bare Conductor)
    • Special Color Codes
    • Calibration Test Reports
    • Continuous use up to 500F (260C)
    • Unaffected by Extreme or Rapid Temperature Variations
    • Excellent Solvent and Moisture Resistance
    • Flame Retardant
    • High Abrasion and cut-thru resistance
    • Resistant to gamma Radiation
    • Does Not Burn
  • Conductors: Solid or stranded thermocouple wire per ASTM E230 & ANSI MC96.1

    Insulation: Two layers of fused polyimide tape, color coded with a polyimide coating

    Construction: Parallel conductors

    Jacket: Two layers of fused polyimide tape

    Operating Temperature: -400F (-240C) t0 +500F (+260C) continuous

    Limits of Error: Conforms to ASTM E230, IEC 584 and ANSI MC 96.1

    Color Code: Conforms to ASTM E230 and ANSI MC96.1 (International Color Codes Available) *

    *Note – Polyimide jackets are not color coded

  • K/K [( 1 )] – [( 2 )] [( 3 )] – [( 4 )]

    1) Optional Metal Covering

    S= Stainless Steel Braid

    CU = Tinned Copper Braid

    I = Inconel Braid

    X = Half-Oval Galvanized Steel

    2) Wire Size AWG

    Available from 14 to 30 AWG

    3) Add (F) for Stranded Wire

    Example: 24F = 24 AWG 7-Strand Conductor

    4) Calibration Grade Designation

    Type K, N, E, J, T available in Standard Limits, Special Limits and Accutherm Grade

    Single Letter = standard limits

    Double Letter = special limits

    Triple Letter = Accutherm limits (half class 1)

Have a Question Contact Us