Copper Instrumentation Cable 600 Volt Cable
PVC/Nylon Copper Instrumentation Cable – Overall Shield
The 600 V Instrumentation Cables are listed as Type TC per UL 1277. These cables are suitable for installations as outlined in NEC 725 and can be used in accordance with NEC 340. These cables may be installed in wet or dry locations; in cable trays, raceways, and pen air; and are suitable for exposure to weather, direct burial and for Class I, Div. 2.
Conductors are insulated with color-coded PVC, coated with clear Nylon, and then twisted with a tin/copper drain wire. Next, an aluminum polyester tape is wrapped around the wires, followed by a final layer of an overall PVC jacket. The cable is UL-listed Subject 1277 (TC) 600V applications.
https://tewire.com/copper-instrumentation-cable-300v/pvcnylon-copper-instrumentation-cable-7-10/
Applications:
Petrochemical Plants
Utilities and Industrial Plants
Power and Control Circuits
For use in NEC article 501 Class 1 Division 2 Hazardous Locations
For use in Accordance with NEC 340
Complies with NEC 725 for use in Class 1 Control Circuits
PVC/Nylon Copper Instrumentation Cable – Individual and Overall Shield
The 600 V Instrumentation Cables are listed as Type TC per UL 1277. These cables are suitable for installations as outlined in NEC 725 and can be used in accordance with NEC 340. These cables may be installed in wet or dry locations; in cable trays, raceways, and pen air; and are suitable for exposure to weather, direct burial and for Class I, Div. 2.
Conductors are insulated with color-coded PVC and a clear nylon insulation jacket, then twisted with a tin/copper drain wire. Next, an aluminum polyester tape is wrapped around the individual pairs, followed by another drain and shield. The layer of overall PVC jacket is applied last. The cable is UL-listed Subject 1277 (TC) for 600V applications.
Applications:
- Petrochemical Plants
- Utilities and Industrial Plants
- Power and Control Circuits
For use in NEC article 501 Class 1 Division 2 Hazardous Locations
For use in Accordance with NEC 340
Complies with NEC 725 for use in Class 1 Control Circuits
Additional Products
Our commitment to customers is exemplified by our continuing investment in our made-here-in-the-USA facilities, our ongoing development of new products, and our enthusiasm for constant improvement.
About TE Wire & Cable LLC
TE Wire & Cable LLC, a Marmon Wire & Cable/Berkshire Hathaway Company, is a premier Thermocouple and Specialty wire and cable manufacturer that formed from the Wire and Cable Division of the Thermo Electric Corporation. TEW&C operations for the manufacture of wire and cable have been in existence for more than 79 years. Starting in 1941, TEW&C committed to a mission of providing high-quality wire to the temperature measurement markets, supplying applications from cryogenic up to 1300°C temperatures. Presently, TE Wire & Cable manufactures a full line of thermocouple wire and cable, from iron and nickel-based alloys, and copper with a full line of insulating materials ranging from PVC to high-end CEFIR®, ceramic fiber braids.